For the Ultimate Sweater Machine®
Jewel Box™Split-Collar Pullover
Level of Difficulty: Beginner
SIZES: S (M, L)
FINISHED MEASUREMENTS:
36 (40, 44)"
36 (40, 44)"
MATERIALSUltimate Sweater Machine®
Caron® Jewel Box™(64% acrylic, 20% rayon, 16% polyester; 2.5oz./70.9g, 100yds/92m): 10 (11,12) skeins in #0015 Amethyst;
USM/ISM KP#3; WY
Caron® Jewel Box™(64% acrylic, 20% rayon, 16% polyester; 2.5oz./70.9g, 100yds/92m): 10 (11,12) skeins in #0015 Amethyst;
USM/ISM KP#3; WY
Suitable for USM/ISM/Bond Classic or 6.5 to 9 mm knitting machine
GAUGE:
Using USM/ISM KP#3 or appropriate tension setting, in St st with MY: 14 sts and 22 R = 4”/10cm
Using USM/ISM KP#3 or appropriate tension setting, in St st with MY: 14 sts and 22 R = 4”/10cm
NEEDLES REQUIRED: 66 (72, 78)
STITCHES USED
Stockinette stitch (St st): Knit side = RS
Stockinette stitch (St st): Knit side = RS
BACK
1. Using closed-edge cast on method and MY, CO 66 (72, 78) sts. RC=000.
2. K to RC=072 (074, 076). Reset RC=000. COR.
3. Shape Armholes: BO 4 (5, 6) sts beg of next 2 rows. 58 (62, 66) sts rem.
4. Dec 1 st ea side next 2 R. 54 (58, 62) sts rem.
5. K 1 R.
6. Dec 1 st ea side next R. 52 (56, 60) sts rem.
7. K to RC=050. COR.
8. Shape Shoulders: BO 6 (7, 6) sts beg of next 2 rows. 40 (42, 48) sts rem.
9. BO 5 (5, 6) sts at beg of next 4 rows. 20 (22, 24) sts rem.
10. Remove rem sts to WY for neck.
1. Using closed-edge cast on method and MY, CO 66 (72, 78) sts. RC=000.
2. K to RC=072 (074, 076). Reset RC=000. COR.
3. Shape Armholes: BO 4 (5, 6) sts beg of next 2 rows. 58 (62, 66) sts rem.
4. Dec 1 st ea side next 2 R. 54 (58, 62) sts rem.
5. K 1 R.
6. Dec 1 st ea side next R. 52 (56, 60) sts rem.
7. K to RC=050. COR.
8. Shape Shoulders: BO 6 (7, 6) sts beg of next 2 rows. 40 (42, 48) sts rem.
9. BO 5 (5, 6) sts at beg of next 4 rows. 20 (22, 24) sts rem.
10. Remove rem sts to WY for neck.
FRONT
1. Work as for Back, Steps 1-6. 52 (56, 60) sts rem.
2. K to RC=028. COR.
3. Shape neck: Remove center 8 (10, 12) sts to WY for neck. COR.
4. Pull ndls LHS of center to HP. 22 (23, 24) sts RHS in WP.
5. K 1 R.
6. Dec 1 st at neck edge next 2 R. 20 (21, 22) sts rem.
7. Dec 1 st at neck edge EOR 4 times. 16 (17, 18) sts rem.
8. K to RC=050. COR.
9. Shape Shoulder as for Back.
10. COL. Pull LHS ndls to FWP.
11. Work as for first side, rev shaping.
1. Work as for Back, Steps 1-6. 52 (56, 60) sts rem.
2. K to RC=028. COR.
3. Shape neck: Remove center 8 (10, 12) sts to WY for neck. COR.
4. Pull ndls LHS of center to HP. 22 (23, 24) sts RHS in WP.
5. K 1 R.
6. Dec 1 st at neck edge next 2 R. 20 (21, 22) sts rem.
7. Dec 1 st at neck edge EOR 4 times. 16 (17, 18) sts rem.
8. K to RC=050. COR.
9. Shape Shoulder as for Back.
10. COL. Pull LHS ndls to FWP.
11. Work as for first side, rev shaping.
SLEEVES
1. Using closed-edge cast on method, CO 42 (44, 46) sts. RC=000.
2. K to RC=060.
3. Shape Sleeve: Inc 1 st ea side this R, then E8R 4 times. 52 (54, 56) sts.
4. K to RC=100 (100, 102). COR.
5. Shape Cap: BO 4 (5, 6) sts beg of next 2 rows. 44 sts rem.
6. Dec 1 st ea side EOR 10 times – 24 sts rem.
7. BO 5 sts beg next 2 rows. 14 sts rem.
8. BO 7 sts beg next 2 rows.
1. Using closed-edge cast on method, CO 42 (44, 46) sts. RC=000.
2. K to RC=060.
3. Shape Sleeve: Inc 1 st ea side this R, then E8R 4 times. 52 (54, 56) sts.
4. K to RC=100 (100, 102). COR.
5. Shape Cap: BO 4 (5, 6) sts beg of next 2 rows. 44 sts rem.
6. Dec 1 st ea side EOR 10 times – 24 sts rem.
7. BO 5 sts beg next 2 rows. 14 sts rem.
8. BO 7 sts beg next 2 rows.
FINISHING
1. Block pieces to measurements.
2. Join Left shoulder seam.
3. Collar: Bring forward 60 (64, 68) ndls to HP. With RS facing, hang on as many sts from neck shaping, including sts on WY. RC=000.
4. K to RC=034.
5. BO loosely.
6. Join Right shoulder, leaving Collar seam open.
7. Set in sleeves.
8. Sew sleeve and side seams.
Weave in ends.
1. Block pieces to measurements.
2. Join Left shoulder seam.
3. Collar: Bring forward 60 (64, 68) ndls to HP. With RS facing, hang on as many sts from neck shaping, including sts on WY. RC=000.
4. K to RC=034.
5. BO loosely.
6. Join Right shoulder, leaving Collar seam open.
7. Set in sleeves.
8. Sew sleeve and side seams.
Weave in ends.
No comments:
Post a Comment